Polycom Phones: Changing the Time and Date Display.
- Last updated on April 29, 2020 at 3:38 PM
Changing the Time and Date Display
The time and date appears on the graphic display of the SoundPoint IP 32x/33x phone. If the phone cannot obtain a time and date from a configured SNTP server, the display will flash. Contact your system administrator if either the time or date is incorrect. You can change the format of the time and date display and can enable or disable it. The default time and date format appears in the following figure.
To configure the time and date:
1 Press the Menu key.
2 Select Settings > Basic > Preferences > Time & Date.
3 Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.
4 Scroll through the options under each of these selections using the Up and Down arrow keys.
5 Press the Select key to confirm your choice. For example, the following figure shows Clock Time.
